Document contents Full plain-text version below — or select and copy text directly from the preview above.
Benefits Fully synthetic air compressor oil which is normally used in rotary vane or screw air compressors, formulated to provide outstanding lubrication and prolonged service life. They restrain many problem commonly encountered with mineral lubricants. AEROL SYNTHETIC S provides excellent oxidation stability, resistance to deposit and sludge formation, high wear reduction rates as well as good corrosion protection. •Superior load carrying and lubricant performance leading to minimize wear and extend machine life. •Excellent low volatility gives low oil consumption. •Outstanding oxidation and thermal stability resist to deposit and sludge formation from thermal degradation. •Stable, non-corrosive, high flash point, high viscosity index liquid and high thermal conductivity. •Seal compatibility, compatible with all sealing materials, NBR, FKM, Silicone and EPM. •Low environmental impact and high biodegradability (> 60% by OECD 301B). For more information pleasecontact: Lubricants Technical Services Division PTT OILAND RETAIL BUSINESS PUBLIC COMPANY LIMITED Tel: +66 2239 7847 Hotline : 1365 Fax: +66 2239 7858 E-mail :pttlubricants@pttor.com •Suitable for screw and rotary vane type compressor which require long life service. •Can be used in any type of compressor at which OEMs require lubricant formulated with anti-oxidant, anti-wear, and rust prevention. Product Description Applications AEROL SYNTHETIC S ISO VG 46 Page 1/2 AEROL SYNTHETIC S REVISION 0/2018 Typical Characteristics Health and Safety Note:Dataandinformationcontainedinthispublicationarebasedonstandardtestunderlaboratoryconditionsand/orperformancetest.To considertheuseofPTTLubricants’productsinparticularapplication,customerisresponsiblefordeterminingwhetherproductand informationareappropriateforcustomerconditionsorshouldconsultwithPTTLubricants’technicalservicedivision.Theprocedureof usinganylubricantmaydifferorchangedependedondifferentmachinesandtheirmanuals.Therefore,werecommendtoread, understandandreviewthelatestSDSinordertoensuretheuseofproductisaccomplishedsafety. Thisproductshowsnosignificant healthorsafetyhazardwhenused undertherecommendedapplications andsuitablehandling. Avoidthedirectcontact.Washimme- diatelyaftercontact.Healthandsafety informationisavailableontheSafety DataSheet(SDS)whichcanbeobtained fromhttp://pttlubricants.pttor.com For more information pleasecontact: Lubricants Technical Services Division PTT OIL AND RETAIL BUSINESS PUBLIC COMPANY LIMITED Tel: +66 2239 7847 Hotline : 1365 Fax: +66 2239 7858 E-mail :pttlubricants@pttor.com Performance Standards The product can cause some skin irritation and has flash point higher than 93.4°C 1 1 0 Professional Lubricant Service Partner Page 2/2 AEROL SYNTHETIC S REVISION 0/2018 AEROL SYNTHETIC S ISO VG 46 •DIN 51506 VDL Tests Methods Units Results 46 Kinematic Viscosity at 40°C ASTMD445 mm 2 /s 46.88 Viscosity Index ASTMD2270 170 Density at 15°C ASTM D 4052 g/cm 3 0.99 Flash Point (COC) ASTMD92 °C 276 Pour Point ASTMD5950 °C -57 Copper Strip Corrosion, 1h, 100°C ASTM D 130 1b Foaming Seq. I ASTMD892 ml/ml Nil/0 Seq. IIASTMD892 ml/ml Nil/0 Seq. IIIASTMD892 ml/ml Nil/0
Extracted automatically from the PDF for search — refer to the original file for exact wording.
