Document contents Full plain-text version below — or select and copy text directly from the preview above.
The premium fully synthetic motor oil designed for ECO CAR with both turbocharged gasoline direct injection (GDI and Turbo-GDI) and port fuel injection (PFI) systems. Developed by latest evolution technology platform EVOTECfortified with SMART Moleculesthat improve engine cleanliness and prevent low-sped pre-ignition (LSPI). Outstanding extra-low friction enhance superb fuel economy for better drivability in both urban traffic and suburb area with long distance. For more information pleasecontact: Lubricants Technical Services Division PTT OILAND RETAIL BUSINESS PUBLIC COMPANY LIMITED Tel: +66 2239 7847 Hotline : 1365 Fax: +66 2239 7858 E-mail :pttlubricants@pttor.com •Designed for all ECO CAR models equipped with both GDI / Turbo-GDI and PFI engines •Support for running with unleaded gasoline (ULG) and ethanol blended gasoline (E10, E20 and E85). Product Description Applications PERFORMA SYNTHETIC ECO CAR SAE 0W-20 Page 1/2 PERFORMA SYNTHETIC ECO CAR REVISION 0/ 2020 Benefits •Extra-low oil friction by EVOTEC technology for maximum fuel economy improvement and better drivability. •Help to reduce exhaust gas and carbon dioxide (CO 2) emission for better environment. •Enhance excellent engine cleanliness especially in piston and help reduce LSPI occurrence in Turbo-GDI engine by SMART Molecules. •Improve superb engine protection against wear and prevent timing chain elongation for maintaining maximum engine performance. •Better oil degradation resistance and engine sludge prevention through extended oil drain intervals. PERFORMA SYNTHETIC ECO CAR Typical Characteristics Health and Safety Note:Dataandinformationcontainedinthispublicationarebasedonstandardtestunderlaboratoryconditionsand/orperformancetest.To considertheuseofPTTLubricants’productsinparticularapplication,customerisresponsiblefordeterminingwhetherproductand informationareappropriateforcustomerconditionsorshouldconsultwithPTTLubricants’technicalservicedivision.Theprocedureof usinganylubricantmaydifferorchangedependedondifferentmachinesandtheirmanuals.Therefore,werecommendtoread, understandandreviewthelatestSDSinordertoensuretheuseofproductisaccomplishedsafety. Thisproductshowsnosignificant healthorsafetyhazardwhenused undertherecommendedapplications andsuitablehandling. Avoidthedirectcontact.Washimme- diatelyaftercontact.Healthandsafety informationisavailableontheSafety DataSheet(SDS)whichcanbeobtained fromhttp://pttlubricants.pttor.com For more information pleasecontact: Lubricants Technical Services Division PTT OIL AND RETAIL BUSINESS PUBLIC COMPANY LIMITED Tel: +66 2239 7847 Hotline : 1365 Fax: +66 2239 7858 E-mail :pttlubricants@pttor.com Performance Standards SAE 0W-20 •API SP •ILSAC GF-6A Test Method Units Results 0W-20 Density at 15°C ASTM D 4052 g/cm 3 0.847 Kinematic Viscosity at 40 °C ASTMD445 mm 2 /s 47.2 Kinematic Viscosity at 100 °C ASTMD445 mm 2 /s 8.82 Viscosity Index ASTMD2270 - 169 MRV with No Yield Stress at -40 °C ASTM D 4684 mPa·s 21,000 Cold-cranking Simulator at -35 °C ASTM D 5293 mPa·s 5,540 Flash Point (COC) ASTM D 92 °C 226 Pour Point ASTM D 5950 °C -45 Page 2/2 PERFORMA SYNTHETIC ECO CAR REVISION 0/ 2020 Professional Lubricant Service Partner
Extracted automatically from the PDF for search — refer to the original file for exact wording.
