Document contents Full plain-text version below — or select and copy text directly from the preview above.
Synthetic technology motor oil specially designed for modern high performance engine with gasoline direct injection (GDI and Turbo-GDI) systems. Developed by latest evolution technology platform EVOTECfortified with SMART Moleculesthat improve engine cleanliness and prevent low-sped pre-ignition (LSPI). Outstanding low friction and heat resistance enhance acceleration response, wear prevention and maintaining engine power for better drivability in all situations. For more information pleasecontact: Lubricants Technical Services Division PTT OILAND RETAIL BUSINESS PUBLIC COMPANY LIMITED Tel: +66 2239 7847 Hotline : 1365 Fax: +66 2239 7858 E-mail :pttlubricants@pttor.com Product Description Page 1/2 PERFORMA SYNTEC PLUS REVISION 0/ 2020 Benefits •Enhance excellent engine cleanliness especially in piston and help reduce LSPI occurrence in Turbo-GDI engine by SMART Molecules. •Improve superb engine protection against wear and prevent timing chain elongation for maintaining maximum engine performance. •Outstanding low oil frictionwith high heat resistance by EVOTEC technologyfor superior acceleration responsiveness and reduced oil consumption. •Better oil degradation resistance and engine sludge prevention through oil drain intervals. •Designed for high performance gasoline engine both GDI and Turbo-GDI. •Recommended for passenger car, sport car and SUV equipped with start-stop system. •Suitable for all port fuel injection (PFI) gasoline engines running with unleaded gasoline (ULG) and ethanol blended gasoline (E10, E20 and E85). Applications PERFORMA SYNTEC PLUS SAE 5W-30 / 10W-40 Typical Characteristics Health and Safety Note:Dataandinformationcontainedinthispublicationarebasedonstandardtestunderlaboratoryconditionsand/orperformancetest.To considertheuseofPTTLubricants’productsinparticularapplication,customerisresponsiblefordeterminingwhetherproductand informationareappropriateforcustomerconditionsorshouldconsultwithPTTLubricants’technicalservicedivision.Theprocedureof usinganylubricantmaydifferorchangedependedondifferentmachinesandtheirmanuals.Therefore,werecommendtoread, understandandreviewthelatestSDSinordertoensuretheuseofproductisaccomplishedsafety. Thisproductshowsnosignificant healthorsafetyhazardwhenused undertherecommendedapplications andsuitablehandling. Avoidthedirectcontact.Washimme- diatelyaftercontact.Healthandsafety informationisavailableontheSafety DataSheet(SDS)whichcanbeobtained fromhttp://pttlubricants.pttor.com For more information pleasecontact: Lubricants Technical Services Division PTT OIL AND RETAIL BUSINESS PUBLIC COMPANY LIMITED Tel: +66 2239 7847 Hotline : 1365 Fax: +66 2239 7858 E-mail :pttlubricants@pttor.com Performance Standards Page 2/2 PERFORMA SYNTEC PLUS REVISION 0/ 2020 PERFORMA SYNTEC PLUS SAE 5W-30 / 10W-40 Test Method Units Results 5W-30 10W-40 Density at 15°C ASTM D 4052 g/cm 3 0.856 0.860 Kinematic Viscosity at 40 °C ASTMD445 mm 2 /s 67.0 97.1 Kinematic Viscosity at 100 °C ASTMD445 mm 2 /s 11.1 14.4 Viscosity Index ASTMD2270 - 157 154 MRV with No Yield Stress ASTM D 4684 mPa·s 18,900 at -35°C16,100 at -30°C Cold-cranking Simulator ASTM D 5293 mPa·s 6,200 at -30°C 5,800 at -25°C Flash Point (COC) ASTM D 92 °C 232 234 Pour Point ASTM D 5950 °C -30 -30 5W-3010W-40 •API SP ✔ ✔ •ILSAC GF-6A ✔ Professional Lubricant Service Partner
Extracted automatically from the PDF for search — refer to the original file for exact wording.
