Document contents Full plain-text version below — or select and copy text directly from the preview above.
PARAFEX3000M Page 1/2 PARAFEX3000M REVISION 1/ 2018 For more information pleasecontact: Lubricants Technical Services Division PTT OILAND RETAIL BUSINESS PUBLIC COMPANY LIMITED Tel: +66 2239 7847 Hotline : 1365 Fax: +66 2239 7858 E-mail :pttlubricants@pttor.com Benefits PARAFEX 3000M specialized formulation from paraffinic base oil. Suitable for using as raw material or additives to enhance finished product properties. It is virtually used in wide range of industries such as rubber process manufacturing, petrochemical, plastic, etc.,. Product has unique characteristic with clear visual. Recommended for using in carefully selected colorful finished products and light finish products which always required color stability and precisely initial color. •Good thermal and oxidation stability •Exhibit good color stability •High flash point and low volatility •Non-hazard to environmental and users •Suitable for using in production process requiring paraffinic oil as component in order to improve specialized product characteristic such as dispersion mixing and flowing characteristic in rubber process, reducing tensile strength, deformer etc., Product Description Applications Typical Characteristics Health and Safety Thisproductshowsnosignificant healthorsafetyhazardwhenused undertherecommendedapplications andsuitablehandling. Avoidthedirectcontact.Washimme- diatelyaftercontact.Healthandsafety informationisavailableontheSafety DataSheet(SDS)whichcanbeobtained fromhttp://pttlubricants.pttor.com Page 2/2 PARAFEX3000M REVISION 1/ 2018 PARAFEX3000M The product can cause some skin irritation and has flash point higher than 93.4°C 1 1 1 The above mentioned data are only indication and do not present any guarantee. Any deviations of the data are no reason for claim. Tests Methods Units Results Appearance Visual Inspection - Bright & Clear ASTM Color ASTM D1500-07 - 0.5 Density at 15 °C ASTMD 4052-11 g/ml 0.8858 Density at 30 °C ASTMD 4052-11 g/ml 0.8764 Kinematic Viscosity at 40 °C ASTMD 445-11 mm 2 /s 99.56 Kinematic Viscosity at 100 °C ASTM D 445-11 mm 2 /s 11.15 Viscosity Index ASTM D 2270-10 - 97 Acid Number ASTM D 664 mg KOH/g 0.04 Carbon Residue ASTM D 4530 %(min) 0.06 Flash Point (COC) ASTMD 92-16 °C 266 Aniline Point ASTM D 611-12 °C 109.15 Pour Point ASTMD 97 °C -9 Total Sulfur Content ASTM D 4294 %wt. 0.3730 Water Content ASTM D 95 %vol. 0 Evaporation Loss ASTM D5800 METHODB%(min) 2.8 Carbon Type Analysis %CA ASTM D 2140-08 % 8.00 %CN ASTM D 2140-08 % 26.80 %CP ASTM D 2140-08 % 65.20 Note:Dataandinformationcontainedinthispublicationarebasedonstandardtestunderlaboratoryconditionsand/orperformancetest.To considertheuseofPTTLubricants’productsinparticularapplication,customerisresponsiblefordeterminingwhetherproductand informationareappropriateforcustomerconditionsorshouldconsultwithPTTLubricants’technicalservicedivision.Theprocedureof usinganylubricantmaydifferorchangedependedondifferentmachinesandtheirmanuals.Therefore,werecommendtoread, understandandreviewthelatestSDSinordertoensuretheuseofproductisaccomplishedsafety. Professional Lubricant Service Partner For more information pleasecontact: Lubricants Technical Services Division PTT OILAND RETAIL BUSINESS PUBLIC COMPANY LIMITED Tel: +66 2239 7847 Hotline : 1365 Fax: +66 2239 7858 E-mail :pttlubricants@pttor.com
Extracted automatically from the PDF for search — refer to the original file for exact wording.
