Document contents Full plain-text version below — or select and copy text directly from the preview above.
Benefits DYNAMIC ULTRA PLUS SAE 15W-40 DYNAMIC ULTRA PLUS is high performance heavy-duty diesel engine oil recommended for on and off highway diesel engine equipped with diesel particulate filter (DPF) or selective catalytic reduction (SCR) in Euro V specification and above. Synthesized with the cutting-edge EVOTEC technology and Ultra Shield molecules to enhance engine cleanliness and prevent sludge formation for all models of diesel engines. It provides excellent engine wear protection, plus delivers efficient engine performance and extra extended oil drain intervals. •Offers superior lubrication and engine wear protection as well as maintains the full power and performance. •Provides high detergency and dispersancy for increasing soot handling, more effective prevention of deposit accumulation and ring sticking problem. •Advanced detergent provide low-SAPS with superb TBN retention for all compatible aftertreatment device. •Gives adequate oil film thickness and prevents sludge formation on vital engine parts. •Prolongs engine life and extended oil drain intervals and minimizes engine oil consumption. For more information pleasecontact: Lubricants Technical Services Division PTT OILAND RETAIL BUSINESS PUBLIC COMPANY LIMITED Tel: +66 2239 7847 Hotline : 1365 Fax: +66 2239 7858 E-mail :pttlubricants@pttor.com •Designed for superior performance of modern heavy -duty diesel engines meeting emission standard Euro V or above with DPF or SCR including common rail system of both on-highway and off-highway applications such as trucks, buses, trailers and heavy equipment. •Suitable for all models of diesel pick up trucks and commercial vehicles equipped with EGR (Exhaust Gas Recirculation) or turbocharger. Product Description Applications Page 1/2 DYNAMIC ULTRA PLUS REVISION 0/ 2025 Typical Characteristics Health and Safety Note:Dataandinformationcontainedinthispublicationarebasedonstandardtestunderlaboratoryconditionsand/orperformancetest.To considertheuseofPTTLubricants’productsinparticularapplication,customerisresponsiblefordeterminingwhetherproductand informationareappropriateforcustomerconditionsorshouldconsultwithPTTLubricants’technicalservicedivision. Theprocedureof usinganylubricantmaydifferorchangedepended ondifferentmachinesand their manuals. Therefore, werecommendtoread, understandandreviewthelatestSDSinordertoensuretheuseofproductisaccomplishedsafety. Thisproductshowsnosignificant healthorsafetyhazardwhenused undertherecommendedapplications andsuitablehandling. Avoid the direct contact. Wash imme- diately after contact. Health and safety information is available on the Safety Data Sheet (SDS) which can be obtained from http://pttlubricants.pttor.com For more information please contact: Lubricants Technical Services Division PTT OIL AND RETAIL BUSINESS PUBLIC COMPANY LIMITED Tel: +66 2239 7847 Hotline : 1365 Fax: +66 2239 7858 E-mail : pttlubricants@pttor.com Performance Standards DYNAMIC ULTRA PLUS SAE 15W-40 Professional Lubricant Service Partner Tests Methods Units Results 15W-40 Density at 15°C ASTM D 4052 g/cm 3 0.8801 Kinematic Viscosity at 40 °C ASTM D 445 mm 2 /s 112.0 Kinematic Viscosity at 100 °C ASTM D 445 mm 2 /s 14.9 Viscosity Index ASTM D 2270 137 Cold-cranking Simulator ASTM D 5293 mPa.s 6342 @-20 °C Total Base Number ASTM D 2896 mg KOH/g 9.0 Flash Point (COC) ASTM D 92 °C 242 Pour Point ASTM D 5950 °C -33 Sulfated Ash ASTM D 874 % wt 1.0 •API CK-4/SN •ACEA E9, E7 •JASO DH-2 •MB 228.31 •VOLVO VDS-4.5,VDS-4 •MACK EO-S 4.5, EO-O PREMIUM PLUS •CUMMINS 20086/81 •MAN M3775, M3575 •MTU TYPE 2.1 •RENAULT RLD-3 •CATERPILLAR ECF-3 •DETROIT DIESEL 93K218, 93K222 •Ford WSS-M2C171-F1 Page 2/2 DYNAMIC ULTRA PLUS REVISION 0/ 2025
Extracted automatically from the PDF for search — refer to the original file for exact wording.
