Document contents Full plain-text version below — or select and copy text directly from the preview above.
V-TECH SAE 40 Benefits V-120 is a monograde engine oil developed to keep engine clean and prevent sludge formation for multipurpose equipment. It helps to protect engine from rust and wear. For more information pleasecontact: Lubricants Technical Services Division PTT OILAND RETAIL BUSINESS PUBLIC COMPANY LIMITED Tel: +66 2239 7847 Hotline : 1365 Fax: +66 2239 7858 E-mail :pttlubricants@pttor.com •Recommended for general diesel engine which operate under moderate duty condition and suitable for low speed diesel engine, such as, small agricultural engine, water pumps etc. Product Description Applications Page 1/2 V-TECH REVISION 0/ 2018 •Provides good lubrication performance. •Provides good engine cleanliness. •Protects engine against wear and corrosion. V-TECH SAE 40 Typical Characteristics Health and Safety Note:Dataandinformationcontainedinthispublicationarebasedonstandardtestunderlaboratoryconditionsand/orperformancetest.To considertheuseofPTTORLubricants’productsinparticularapplication,customerisresponsiblefordeterminingwhetherproductand informationareappropriateforcustomerconditionsorshouldconsultwithPTTORLubricants’technicalservicedivision.Theprocedure ofusinganylubricantmaydifferorchangedependedondifferentmachinesandtheirmanuals.Therefore,werecommendtoread, understandandreviewthelatestSDSinordertoensuretheuseofproductisaccomplishedsafety. Thisproductshowsnosignificant healthorsafetyhazardwhenused undertherecommendedapplications andsuitablehandling. Avoidthedirectcontact.Washimme- diatelyaftercontact.Healthandsafety informationisavailableontheSafety DataSheet(SDS)whichcanbeobtained fromhttp://pttlubricants.pttor.com For more information pleasecontact: Lubricants Technical Services Division PTT OIL AND RETAIL BUSINESS PUBLIC COMPANY LIMITED Tel: +66 2239 7847 Hotline : 1365 Fax: +66 2239 7858 E-mail :pttlubricants@pttor.com Performance Standards •API CC/SC The product can cause some skin irritation and has flash point higher than 93.4°C 1 1 1 Professional Lubricant Service Partner Page 2/2 V-TECH REVISION 0/ 2018 Tests Methods Units Results SAE 40 Density at 15°C ASTM D 4052 g/cm 3 0.894 Kinematic Viscosity at 40 °C ASTMD445 mm 2 /s 151.6 KinematicViscosityat 100°C ASTMD445 mm 2 /s 15.3 Viscosity Index ASTMD2270 102 Total Base Number ASTM D 2896 mg KOH/g 4.8 Flash Point (COC) ASTM D 92 °C 270 Pour Point ASTM D 5950 °C -9
Extracted automatically from the PDF for search — refer to the original file for exact wording.
