Document contents Full plain-text version below — or select and copy text directly from the preview above.
Benefits TERBINEP ISO VG 32, 46, 68 Premium industrial turbine oils formulated with high quality extreme pressure additive to enhance oil drain interval, water separabilityand foam formation protection. TERBIN EP provides an excellent protection for turbine with reduction gear sets and is officially approved by SIEMENS. •Enhanced oxidative and thermal resistance to extend oil drain periods. •Enhanced wear and corrosion protection. •Extra effective antifoam protection. Page 1/2 TERBINEP REVISION 0/2018 •Recommended for water, steam, and gas turbines with reduction gear sets where extreme pressure or anti-wear protection is required. •Suitable for various applications e.g. hydraulic control systems, vacuum pump, and general transmission systems where vanish protection, and rust and oxidation prevention are required. •Especially designed for turbines that requires SIEMENS standard. Product Description Applications For more information pleasecontact: Lubricants Technical Services Division PTT OILAND RETAIL BUSINESS PUBLIC COMPANY LIMITED Tel: +66 2239 7847 Hotline : 1365 Fax: +66 2239 7858 E-mail :pttlubricants@pttor.com Typical Characteristics Health and Safety Thisproductshowsnosignificant healthorsafetyhazardwhenused undertherecommendedapplications andsuitablehandling. Avoidthedirectcontact.Washimme- diatelyaftercontact.Healthandsafety informationisavailableontheSafety DataSheet(SDS)whichcanbeobtained fromhttp://pttlubricants.pttplc.com Page 2/2 TERBINEP REVISION 0/2018 Tests Methods Units Results 32 46 68 Kinematic Viscosity at 40 °C ASTMD445 mm 2 /s 32.95 47.10 68.30 Viscosity Index ASTMD2270 112 104 108 Flash Point (COC) ASTMD92 °C 218 224 234 FZG Scuffing Load (A/8.3/90) ASTM D 5182 Stage 9 9 9 Total Acid Number ASTM D 664 mgKOH/g 0.10 0.15 0.14 Rust Prevention ASTM D 665 Pass Pass Pass Air Release Property at 50°C ASTM D3427 min 1 3 3 Oxidation Stability ASTM D 943 Time to 2.0 TAN hr >10,000 >10,000 >10,000 Water separation ASTM D 1401 40-40-0 (3)40-40-0 (5)40-40-0 (5) •DIN 51515 Part 1 (L-TD) •DIN 51524 Part 1 (HL) •General Electric GEK 32568 F •General Electric GEK 107395 •General Electric GEK 101941A (FZG/FLS =8) •Siemens/KWU TLV 9013 04, 9013 05 •BS 489 (CIGRE) •ALSTOM HTGD 90117V0001 U Performance Standards The product can cause some skin irritation and has flash point higher than 93.4°C 1 1 0 TERBINEP ISO VG 32, 46, 68 For more information pleasecontact: Lubricants Technical Services Division PTT OILAND RETAIL BUSINESS PUBLIC COMPANY LIMITED Tel: +66 2239 7847 Hotline : 1365 Fax: +66 2239 7858 E-mail :pttlubricants@pttor.com Note:Dataandinformationcontainedinthispublicationarebasedonstandardtestunderlaboratoryconditionsand/orperformancetest.To considertheuseofPTTLubricants’productsinparticularapplication,customerisresponsiblefordeterminingwhetherproductand informationareappropriateforcustomerconditionsorshouldconsultwithPTTLubricants’technicalservicedivision.Theprocedureof usinganylubricantmaydifferorchangedependedondifferentmachinesandtheirmanuals.Therefore,werecommendtoread, understandandreviewthelatestSDSinordertoensuretheuseofproductisaccomplishedsafety. Professional Lubricant Service Partner
Extracted automatically from the PDF for search — refer to the original file for exact wording.
