เนื้อหาในเอกสาร ข้อความทั้งหมดในรูปแบบข้อความล้วน — หรือเลือกและคัดลอกข้อความจากตัวอย่างเอกสารด้านบนได้โดยตรง
1 10 100 1000 0 20406080100120140 Kinematic Viscosity (cSt) Temperature (°C) KVT Diagram HYDRAULIC BIOSYN ISO VG 32 ISO VG 46 ISO VG 68 Benefits Premium and high performance hydraulic fluid blended with advanced additive technologies. It is developed to meet stringent environmental standard giving excellent thermal stability and wear protection. High viscosity index and very low pour point exhibit ability to use in wide temperature range. HYDRAULIC BIOSYN is biodegradable (>60% biodegradability by OECD 301B) and classified as HEES fluid (ISO 15380). It also conforms EPA Vessel General Permit (VGP). •High viscosity index and low pour point properties which can be used efficiently in board operating temperature range. •Low environmental impacts and high biodegradability more than 60% by OECD 301B. •Excellent wear and corrosion protections which result in extending service life of machine. •Excellent thermal and oxidative stability to reduce oil degradation and deposit formation extending oil drain intervals. •Excellent hydrolytic stability to resist chemical decomposition in the presence of water. For more information pleasecontact: Lubricants Technical Services Division PTT OILAND RETAIL BUSINESS PUBLIC COMPANY LIMITED Tel: +66 2239 7847 Hotline : 1365 Fax: +66 2239 7858 E-mail :pttlubricants@pttor.com •Designed for industrial hydraulic systems which operate in wide temperature range and environmentally sensitive areas where ISO HEES category hydraulic fluids are recommended. •Suitable for hydraulics of mobile, construction, mining and agricultural equipment. •Recommended for marine applications requiring environmentally acceptable lubricants (EALs). Product Description Applications HYDRAULIC BIOSYN Page 1/2 HYDRAULIC BIOSYN REVISION 0/2021 ISO VG 32, 46, 68 Typical Characteristics Health and Safety Note:Dataandinformationcontainedinthispublicationarebasedonstandardtestunderlaboratoryconditionsand/orperformancetest.To considertheuseofPTTLubricants’productsinparticularapplication,customerisresponsiblefordeterminingwhetherproductand informationareappropriateforcustomerconditionsorshouldconsultwithPTTLubricants’technicalservicedivision.Theprocedureof usinganylubricantmaydifferorchangedependedondifferentmachinesandtheirmanuals.Therefore,werecommendtoread, understandandreviewthelatestSDSinordertoensuretheuseofproductisaccomplishedsafety. Thisproductshowsnosignificant healthorsafetyhazardwhenused undertherecommendedapplications andsuitablehandling. Avoidthedirectcontact.Washimme- diatelyaftercontact.Healthandsafety informationisavailableontheSafety DataSheet(SDS)whichcanbeobtained fromhttp://pttlubricants.pttor.com For more information pleasecontact: Lubricants Technical Services Division PTT OIL AND RETAIL BUSINESS PUBLIC COMPANY LIMITED Tel: +66 2239 7847 Hotline : 1365 Fax: +66 2239 7858 E-mail :pttlubricants@pttor.com Performance Standards The product can cause some skin irritation and has flash point higher than 93.4°C 1 0 1 Page 2/2 HYDRAULIC BIOSYN REVISION 0/2021 HYDRAULIC BIOSYN ISO VG 32, 46, 68 •ISO 15380 HEES •MAG (Cincinnati Milacron) P-68, P-69, P-70 •Bosch Rexroth RE 90220-1 •Parker (formerly Denison) HF-1, HF-2, HF-6 •Eaton 03-401-2010 •Vessel General Permit (VGP) Tests Methods Units Results 32 46 68 Kinematic Viscosity at 40 °C ASTMD445 mm 2 /s 32 46 68 KinematicViscosityat 100°C ASTMD445 mm 2 /s 6.1 8.1 11 Viscosity Index ASTMD2270 147 144 146 Density at15°C ASTMD4052 g/cm 3 0.937 0.9393 0.944 Density at 30°C ASTMD4052 g/cm 3 0.9293 0.9301 0.9356 Flash Point (COC) ASTMD92 °C 280 264 290 Pour Point ASTMD97 °C -36 -36 -36 CopperStrip Corrosion ASTM D 130 1a 1a 1a Foaming Seq. I ASTMD892 ml/ml 10/0 10/0 10/0 Seq. II ASTMD892 ml/ml 0/0 0/0 0/0 Seq. III ASTMD892 ml/ml 0/0 0/0 0/0 Professional Lubricant Service Partner
ข้อความข้างต้นแปลงจากไฟล์ PDF โดยอัตโนมัติเพื่อการค้นหา — กรุณาอ้างอิงไฟล์ต้นฉบับเป็นหลัก
