เนื้อหาในเอกสาร ข้อความทั้งหมดในรูปแบบข้อความล้วน — หรือเลือกและคัดลอกข้อความจากตัวอย่างเอกสารด้านบนได้โดยตรง
Benefits CRYSTEX 4 •High viscosity index •Excellent low temperature flow with low pour point •Good thermal stability Product Description Applications Page 1/2 CRYSTEX 4 REVISION 0/2021 For more information pleasecontact: Lubricants Technical Services Division PTT OIL AND RETAIL BUSINESS PUBLIC COMPANY LIMITED Tel: +66 2239 7847 Hotline : 1365 Fax: +66 2239 7858 E-mail :pttlubricants@pttor.com CRYSTEX 4 is high quality polyalphaolefin(PAO) synthetic base oil with low viscosity grade. It has high viscosity index, excellent low temperature flow with low pour point, good thermal stability and compatibility with mineral oil. It is used in many synthetic product such as automotive and industrial lubricants working in hot or cold application •Suitable for using in automotive and industrial lubricants working in hot or cold application such as engine, transmission oil, gear boxes Typical Characteristics Health and Safety Note:Dataandinformationcontainedinthispublicationarebasedonstandardtestunderlaboratoryconditionsand/orperformancetest.To considertheuseofPTTLubricants’productsinparticularapplication,customerisresponsiblefordeterminingwhetherproductand informationareappropriateforcustomerconditionsorshouldconsultwithPTTLubricants’technicalservicedivision.Theprocedureof usinganylubricantmaydifferorchangedependedondifferentmachinesandtheirmanuals.Therefore,werecommendtoread, understandandreviewthelatestSDSinordertoensuretheuseofproductisaccomplishedsafety. This productbeingshown withno significant health or safety hazard when usedunder the recommended applicationsandsuitablehandling. Avoid the direct contact. Wash imme- diately after contact. Health and safety information is available on the Safety Data Sheet (SDS) which can be obtained fromhttp://pttlubricants.pttplc.com CRYSTEX 4 The above mentioned data are only indication and do not present any guarantee. Any deviations of the data are no reason for claim. Tests Methods Units Results Appearance Visual Inspection - Bright & Clear Density g/ml 0.820 Kinematic Viscosity at 40 °C ASTMD445 mm 2 /s 19.0 Kinematic Viscosity at 100 °C ASTM D445 mm 2 /s 4.1 Viscosity Index ASTMD2270 - 126 Flash Point (COC) ASTMD92 °C 220 Pour Point ASTM D97 °C -66 Aniline Point ASTM D 611 °C 119.2 NoackVolatility at 250 °C, 1 hr ASTM D5800 %wtEvap < 14.0 BrookfieldViscosity at -40 °C ASTM D2983 cP 2,500 Cold Cranking Simulator at -35 °CASTM D5293 cP 1,424 Carbon Type Analysis %CA ASTM D2140 % 1.9 %CN ASTM D2140 % 15.2 %CP ASTM D2140 % 82.9 Page 2/2 CRYSTEX 4 REVISION 0/2021 For more information pleasecontact: Lubricants Technical Services Division PTT OIL AND RETAIL BUSINESS PUBLIC COMPANY LIMITED Tel: +66 2239 7847 Hotline : 1365 Fax: +66 2239 7858 E-mail :pttlubricants@pttor.com Professional Lubricant Service Partner
ข้อความข้างต้นแปลงจากไฟล์ PDF โดยอัตโนมัติเพื่อการค้นหา — กรุณาอ้างอิงไฟล์ต้นฉบับเป็นหลัก
