เนื้อหาในเอกสาร ข้อความทั้งหมดในรูปแบบข้อความล้วน — หรือเลือกและคัดลอกข้อความจากตัวอย่างเอกสารด้านบนได้โดยตรง
Benefits SYNTHETIC BREKE FLUID DOT 3 SYNTHETIC BREKE FLUID DOT 3 is a brake fluid, which produced from a glycol ether and high quality additives for corrosion protection of brake fluid system. This product comply with all specification requirements of FMVSS No. 116, ISO4925, SAE J1703 and also approved by the Thai Industrial Standards Institute (TISI) to achieve the TIS : 591-2011 •Resists to high temperature operating condition and provides good compatibility with rubber seal and other brake part. •Prevents gum formation, thereby allowing the piston and the master brake cylinder to move smoothly and become more endurable For more information pleasecontact: Lubricants Technical Services Division PTT OILAND RETAIL BUSINESS PUBLIC COMPANY LIMITED Tel: +66 2239 7847 Hotline : 1365 Fax: +66 2239 7858 E-mail :pttlubricants@pttor.com •Recommended for the hydraulic brake system – both disc and drum brakes in passenger cars and commercial vehicle requiring DOT 3 fluids. It is also applicable to the clutch system. •Recommendation : The brake system should be periodically checked as well as the brake fluid that need to be changed every 12-18 months to prevent contamination caused by other substances, especially humidity or water resulting in reducing the boiling point of brake fluid. Product Description Applications Page 1/2 SYNTHETIC BREKE FLUID DOT 3 REVISION 0/ 2018 Typical Characteristics Health and Safety Note:Dataandinformationcontainedinthispublicationarebasedonstandardtestunderlaboratoryconditionsand/orperformancetest.To considertheuseofPTTLubricants’productsinparticularapplication,customerisresponsiblefordeterminingwhetherproductand informationareappropriateforcustomerconditionsorshouldconsultwithPTTLubricants’technicalservicedivision.Theprocedureof usinganylubricantmaydifferorchangedependedondifferentmachinesandtheirmanuals.Therefore,werecommendtoread, understandandreviewthelatestSDSinordertoensuretheuseofproductisaccomplishedsafety. Thisproductshowsnosignificant healthorsafetyhazardwhenused undertherecommendedapplications andsuitablehandling. Avoidthedirectcontact.Washimme- diatelyaftercontact.Healthandsafety informationisavailableontheSafety DataSheet(SDS)whichcanbeobtained fromhttp://pttlubricants.pttor.com For more information pleasecontact: Lubricants Technical Services Division PTT OIL AND RETAIL BUSINESS PUBLIC COMPANY LIMITED Tel: +66 2239 7847 Hotline : 1365 Fax: +66 2239 7858 E-mail :pttlubricants@pttor.com •FMVSS No. 116 •ISO 4925 class 3 •SAE J1703 •TIS 591-2011 : quality level 3 Performance Standards Professional Lubricant Service Partner SYNTHETIC BREKE FLUID DOT 3 Page 2/2 SYNTHETIC BREKE FLUID DOT 3 REVISION 0/ 2018 Tests Methods Units Results Density at 15°C ASTM D 4052 g/cm 3 0.862 Kinematic Viscosity at -40 °C SAE J 1704 mm 2 /s 1,225 KinematicViscosityat 100°C ASTMD 445 mm 2 /s 2.0 Reflux Boiling Point SAE J 1703 °C 250 WetBoiling Point SAE J 1703 °C 166 pH value FMVSS 116 °C 9.2 Color ASTM D 1500 0.5
ข้อความข้างต้นแปลงจากไฟล์ PDF โดยอัตโนมัติเพื่อการค้นหา — กรุณาอ้างอิงไฟล์ต้นฉบับเป็นหลัก
