Document contents Full plain-text version below — or select and copy text directly from the preview above.
•Recommended for all cooling systems used in light and heavy duty vehicle, such as passenger and commercial vehicles. Suggestions: •Drain and flush the existing coolant before using RADIATOR COOLANT. •Recommended mixing ratio for coolant per treated water are in the range of 30 to 50% by volume. For example, RADIATOR COOLANT 1 L with treated water 1-2 L. •The coolant change intervals are recommended at 250,000 km or 2,000 hrsfor light duty vehicle and at 650,000 km or 8,000 hrsfor heavy duty vehicle. For more information pleasecontact: Lubricants Technical Services Division PTT PUBLIC COMPANY LIMITED Tel: +66 2239 7847 Hotline : 1365 Fax: +66 2239 7858 E-mail :pttlubricants@pttplc.com RADIATOR COOLANT is a concentrated radiator coolant produced from high quality mono ethylene glycol (MEG). With the latest additive technology, superior performances of rust prevention and cooling efficiency are achieved. Also, with low level freezing point, operating against cold climate is available. RADIATOR COOLANT meets the requirement of international and automobile OEMs standard and suitable for both light and heavy duty vehicles. •Superior rust prevention and prolong radiator life. •Leverage boiling temperature, enhance cooling efficiency and prevent the engine overheat. •With proper ratio, reduced freezing temperature enable the cooling system to operate under cold climate. •Compatible with any rubber, plastic, and seal. Product Description Benefits Applications RADIATOR COOLANT Page 1/2 RADIATOR COOLANT REVISION 0/ 2018 Note:Dataandinformationcontainedinthispublicationarebasedonstandardtestunderlaboratoryconditionsand/orperformancetest.To considertheuseofPTTORLubricants’productsinparticularapplication,customerisresponsiblefordeterminingwhetherproduct andinformationareappropriateforcustomerconditionsorshouldconsultwithPTTORLubricants’technicalservicedivision.The procedureofusinganylubricantmaydifferorchangedependedondifferentmachinesandtheirmanuals.Therefore,werecommend toread,understandandreviewthelatestSDSinordertoensuretheuseofproductisaccomplishedsafety. For more information pleasecontact: Lubricants Technical Services Division PTT PUBLIC COMPANY LIMITED Tel: +66 2239 7847 Hotline : 1365 Fax: +66 2239 7858 E-mail :pttlubricants@pttplc.com •Meet standard specifications: ASTM D3306, ASTM D6210 , JIS K2234 •Meet OEMs requirements: คุณสมบัติจ ำเพำะ Performance Standard OEMs Specifications Deutz Deutz-MWM Jenbacher MANB&WAG DAF Jaguar Jaguar LandRover Mack Ford Mercedesesbenz GM MAN Volkswagen 0199-99-1115/6 0199-99-2091/8 TA1000-0201 D365600 74002 CMR8229 WSS-M97B44-D WSS-M97B44-D 014GS17009 WSS-M97B44-D 325.3 GM6277M 324typeSNF TL774F Health and Safety This product shows no significant health or safety hazard when used under the recommended applications andsuitablehandling. Avoiddirectcontact.Washimme- diatelyaftercontact.Healthandsafety informationisavailableontheSafety DataSheet(SDS)whichcanbeobtained fromhttp://pttlubricants.pttplc.com Typical Characteristics Page 2/2 RADIATOR COOLANT REVISION 0/ 2018 Professional Lubricant Service Partner RADIATOR COOLANT 1 1 1 Tests Methods Units Results Density at 15°C ASTM D 1122 g/cm 3 1.116 Boiling Point ASTMD 1120 °C 172 pH(50% vol. in Distilled Water) ASTMD 1287 - 8.3 Water Content ASTM D 1123 % mass 2.5 ReserveAlkalinity ASTM D 1121 cm 3 5.0 Nitrate, Nitrite, Amine, Phosphate, Borate ASTM D 5827 - Nil Silicon Content ASTM D 6130 ppm Nil Color Visual - Fluorescent Green The product can cause some skin irritation
Extracted automatically from the PDF for search — refer to the original file for exact wording.
